|
2.4 GHz Model, Catalog Number 8245:
Dimensions: 4.4 x 2.7 x 1.4 inches (111 x 69 x 36 mm)
Weight: 6 oz (170 g)
Interface: Serial RS232 DB9 female connector
Output Power: 100 mW
Transmission Range: Up to 500 feet (152 m) indoors;
Up to 3 miles (5 km)line-of-sight
Frequency Band: 2.402 - 2.478 GHz, FHSS
Power Consumption at 12 volt DC: 125mA TX, 80mA RX
900 MHz Model, Catalog Number 8253:
Dimensions: 4.4 x 2.7 x 1.4 inches (111 x 69 x 36 mm)
Weight: 6 oz (170 g)
Interface: Serial RS232 DB9 female connector
Output Power: 1000 mW
Transmission Range: Up to 1500 feet (450 m) indoors;
Up to 20 miles (32 km) line-of-sight
Frequency Band: 902 - 928 MHz, FHSS
Power Consumption at 12 volt DC: 400mA TX, 40mA RX
|
Aerocomm ConnexLink Wireless Transceivers offer a cable-free means to
remotely monitor weather information when hardwire installations are not
feasible or practical.
Spread spectrum bandwidth and channel-hopping technology minimize the effects of interference to
prevent data corruption. Proprietary signal coding provides data verification
security.
For fixed-mount weather stations, 2.4 GHZ and 900MHZ wireless transceiver options
offer line-of-site range at 3 miles and 20 miles, respectively.
For the wireless Orion or Magellan Weather Station, a transceiver is
housed in the weatherproof enclosure near the sensor head. In the case
of the Capricorn 2000EX, the Control Module and transceiver are housed
in a weatherproof enclosure at the sensor site. A second transceiver is
connected to the Weather MicroServer near the data display site, which
then is connected to a computer.
These stations require power at the site of the weatherproof enclosure.
This power can be AC, battery or solar.
A wireless weather station system configuration would include the weather station itself
with display or software, plus a weatherproof enclosure and transceivers.
Portable Wireless Weather Stations
Portable weather stations come standard with 2.4 GHz transceivers which
are good over a two to three mile, line-of-sight range. The transceiver
is mounted in the carrying case with the battery pack.
Certifications
ConnexLinks are approved for operation by FCC (USA), IC (Canada) and CE
(Europe). No additional certification is required.
|
