Call for a quote
1-866-625-8620
or Email
 

Columbia Weather Systems - Weather Station Accessories



Capricorn 2000 Professional Weather Station

Click for more Information


Adobe Acrobat Reader


Self Aspirating Radiation Shield for Capricorn 2000 Weather Stations

Weather Station Self Aspirating Radiation Shield

When temperature accuracy is critical - especially in environments where your temperature sensor is subject to incident radiation from either direct sunlight or proximate surfaces - a radiation shield is the solution. This self-aspirating radiation shield will help you get the most accurate temperature reading from your Capricorn or other temperature sensor. We listened to our customers to find out just what they needed and developed a thermally-engineered shield unlike any other.

Catalog Number: 82101
Data Sheet

back to top

Instrumentation Mast Tripod, 10 ft.


Weather Station Instrumentation Mast Tripod

Tripod Model T-1000 is designed to provide up to 10 feet of stable, secure support for your meteorological sensors.

The T-1000 is constructed from welded aluminum and is powder coated for appearance and longevity. The 15-pound tripod can easily support up to 60 pounds of equipment. An optional tie-down kit allows for additional security in high-wind areas.

Set up takes less than five minutes. Simply insert the legs into the main body and install the stainless steel retainer pins. Extend the mast to the desired height and insert another retainer pin. Install the guy wires and you're ready to go!

Specifications
Capacity: Supports up to 60 lbs.
Shipping Weight: 17lbs
Shipping Box Dimensions: 63" x 8" x 8"
Data Sheet

Order Information
Tripod Model T-1000, Catalog Number: 88007
Tiedown Kit, Catalog Number: 88008

back to top

Wind Sensor Mast and Mounting Hardware

Weather Station Wind Sensor Mast and Mounting Hardware Kit

Steel Mast, 10 ft.
For mounting wind sensor assembly; includes two five-foot sections.
Catalog Number: 88005

Fiberglass Mast, 10 ft.
For mounting wind sensor assembly; recommended for lightning-prone regions; includes two five-foot sections.
Catalog Number: 88004


Roof Mount Kit
Includes universal mast mount, guy ring and collar, guy wire, lag screws, eye bolt screws, cable standoffs, cable nail clips and wall bushings to route cable properly.
Catalog Number: 88002

Wall Mount Kit
Includes wall mount, lag screws, cable nail clips, and wall bushings.
Catalog Number: 88003
Data Sheet

back to top

Weatherproof Enclosure for Capricorn 2000 Weather Stations

Weather Station Weatherproof Enclosure

A weatherproof enclosure is available for the Capricorn 2000 Control Module. The weatherproof enclosure can house the Control Module board, power supply and wireless transceiver.

Designed for use in both indoor and outdoor settings, the enclosure can be used to protect sensitive instrumentation from corrosive environments typically found in oil refineries, chemical processing plants, waste water treatment, and marine installations.

Cables are routed through liquid tight strain relief fittings.

Construction:
  • Molded fiberglass polyester has outstanding chemical and temperature resistance and exhibits excellent weatherability and physical properties.
  • Seamless foam-in-place gasket assures watertight and dust-tight seal
  • Polyester mounting feet and stainless steel attachment screws are provided with each enclosure.
  • The quick-release, corrosion-resistant polyester latches are located in corners which allow unobstructed access to enclosure.

Overall Size:
L 12 x W 10 x H 6 inches (305 x 254 x 152mm)

back to top

Weatherproof Enclosure for Orion and Orion LX Wireless Weather Stations

Weather Station Weatherproof Enclosure

For the Orion and Orion LX wireless weather stations the weatherproof enclosure houses the power supply and wireless transceiver.

Designed for use in either indoor or outdoor settings, the enclosure can be used in highly corrosive environments typically found in oil refineries, chemical processing plants, waste water treatment, and marine installations.

Cables are routed through liquid tight strain relief fittings.

Construction:
  • Molded fiberglass polyester has outstanding chemical and temperature resistance and exhibits excellent weatherability and physical properties.
  • Seamless foam-in-place gasket assures watertight and dust-tight seal
  • Polyester mounting feet and stainless steel attachment screws are provided with each enclosure.
  • The quick-release, corrosion-resistant polyester latches are located in corners which allow unobstructed access to enclosure.

Overall Size:
L 10 x W 8 x H 6 inches (254 x 203 x 152mm)

back to top

Weatherproof Enclosure for Orion LX Weather MicroServer

Weather Station Weatherproof Enclosure

For the Orion LX weather station, a weatherproof enclosure is available to house the LX Weather MicroServer and protect it from the elements.

Designed for use in indoor and outdoor settings, the enclosure can be used in highly corrosive environments typically found in oil refineries, chemical processing plants, waste water treatment, and marine installations.

Cables are routed through liquid tight strain relief fittings.

Construction:
  • Molded fiberglass polyester has outstanding chemical and temperature resistance and exhibits excellent weatherability and physical properties.
  • Seamless foam-in-place gasket assures watertight and dust-tight seal
  • Polyester mounting feet and stainless steel attachment screws are provided with each enclosure.
  • The quick-release, corrosion-resistant polyester latches are located in corners which allow unobstructed access to enclosure.

Overall Size:
L 10 x W 8 x H 6 inches (254 x 203 x 152mm)

back to top

Email Sales@ColumbiaWeather.com Toll Free 1.866.625.8620
Home | Products | Applications | Newsletter | CWS Weather | Resources | About us
Contact Us
| Site Map
Columbia Weather Systems, Inc. is a subsidiary of Hinds Instruments, Inc.
©Copyright 2005 All rights reserved, Columbia Weather Systems, Inc.
2240 NE Griffin Oaks Street, Suite 100, Hillsboro, OR 97124 MAP